Your automation, our passion.

+1.330.486.0001  |  HPD Support Login  |  Newsletter Signup

RocketLinx® ES7510-XT

Products Discontinued
The RocketLinx ES7510-XT switch has been discontinued. The RocketLinx ES7510-XT product pages will be maintained to provide product and support information.

Managed Power over Ethernet Industrial managed switch, eight PoE Plus ports and two Gigabit ports, IEEE 802.3af and IEEE 802.3at compliant, extended operating temperature range. Pepperl+Fuchs Comtrol's rugged Power over Ethernet switches stand up to hot, cold and harsh conditions.

Part Number: 32046-3

Power Supply Chart

PortVision DXweb

  • Integrate IP cameras, access points and other PoE devices
  • Eight 10/100BASE-TX PoE Plus ports and two Gigabit RJ45/SFP combo ports featuring Digital Diagnostic Monitoring (DDM)
  • PoE ports support both IEEE 802.3af (15.4W) and the latest high power IEEE 802.3at standards (30W)
  • Eco-Friendly Power Budget Efficiency Mode
  • TACACS+ support
  • Easy setup and administration via PortVision DX application, web page or Cisco-like command line interfaces
  • Advanced redundant ring support with 5ms recovery time, for up to 4 x 100M rings plus two Gigabit uplink rings
  • Advanced security features include Port Security, Access IP List, HTTPS and SSH login
  • SNMP and IEEE 802.1AB LLDP for network management
  • Tag-VLAN supporting multiple VLAN traffic isolation
  • LACP port trunking for bandwidth aggregation to support video surveillance
  • Redundant DC power inputs and multiple event relay output for advanced device alarm control
  • Extended operating temperature -40° to 75°C
  • NEMA TS2 compliant
  • RoHS 2 compliant under CE
  • IPv6 support

Download VISIO Stencils


PoE Plus Supporting High Power Devices

The Pepperl+Fuchs Comtrol RocketLinx ES7510-XT managed industrial PoE Plus switch is designed to meet the high power and advanced management needs of critical traffic applications such as real-time IP video surveillance and wireless communication utilizing outdoor rated IP cameras and high power IEEE 802.11 access points. Featuring a rugged design for harsh environments, intuitive web, CLI, SNMP management options, power scheduling and eight fully compliant IEEE 802.3at PoE injector ports, the ES7510-XT is easily installed in industrial settings and traffic cabinets supporting even the most power intensive devices such as IP cameras with heaters and pan/tilt/zoom controls.

Innovative Power Control

In addition to functioning as a PoE power source, the ES7510-XT includes advanced device controls, ensuring that power consumption does not exceed parameters defined by the user. This includes power budget control functions to limit power output on devices not reporting correct consumption rates and device priority options to guarantee power to critical devices while avoiding power supply overloads.

Management and Security

The RocketLinx ES7510-XT is equipped with full Layer 2+ management capabilities to provide the most flexible network configuration and control. Features like Link Aggregation Control Protocol allow grouping of multiple ports to enhance bandwidth and provide load balancing while Port-Based VLAN, QoS, IGMP Snooping, and Rate Control features enable optimum control over the network environment. In addition to the full array of management capabilities, the ES7510-XT also supports the most advanced security features to protect the network and guarantee secure, reliable data transmission. Fault relay and e-mail notification of event alarms, DHCP supporting IP and MAC binding, IEEE 802.1X network access control, SSH, and many other controls are included to make secure administration and management a simple task.

  • RocketLinx ES7510-XT PoE Plus Switch
  • Quick Installation Guide
  • Network Interface10/100BASE-TX PoE Plus
    100BASE-FX, 1000BASE-SX/LX/LHX/XD/ZX Gigabit Fiber
  • Connector TypeEight - RJ45
    Two - RJ45/SFP Combo
  • EnclosureIP30 grade steel metal case with aluminum panel housing for heat dissapation
  • Installation MethodDIN rail
    Wall or panel mount
  • LED IndicatorsPower 1/2
    System Status
    Ring Status
    DI and DO Status
    Ethernet Port Link/Activity
    PoE Status
    Gigabit Port Link/Activity
  • Digital Input (DI)/Digital Output (DO)4-pin screw terminal block with one DI and one DO (Dry Relay Output)
  • Serial Console PortOne RJ45 RS-232 (TXD, RXD, Signal GND), Baud Rate: 9600bps, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None
  • Thermal MonitoringEmbedded board-level thermal detector for main-chip temperature monitoring
  • Dimensions5.0" x 6.3" x 3.7"
    12.7 x 16 x 9.4 cm
  • Product Weight1.85 lbs
    1.29 kg
Ethernet Specifications
  • Number of PortsTen: 8 - RJ45 and 2 - RJ45 SFP combo Gigabit uplink
  • RJ458 RJ45: 10/100BASE-TX PoE Plus
    2 RJ45: 10/100/1000BASE-TX
    Auto MDI/MDIX, Auto-negotiation (Speed/Duplex mode)
  • SFP DDM (Optional)100BASE-FX Fiber, 1000BASE-SX/LX/LHX/XD/ZX
    Auto-negotiation (Speed/Duplex Mode)
  • Cable TypesCat 3, Cat 4, Cat 5, Cat 5e, Cat 6 (UTP or STP)
  • Link DistancesRJ45: 100 meters
    SFP model
  • Port Alarm RelayYes
  • Transfer Packet Size64 Bytes to 1522 bytes (includes double VLAN tag)
  • StandardsIEEE 802.3af PoE
    IEEE 802.3at LLDP PoE Plus
    IEEE 802.1AB: Link Layer Discovery Protocol
    IEEE 802.1D-2004: Rapid Spanning Tree Protocol
    IEEE 802.1p: Class of Service
    IEEE 802.1Q-2003: VLAN Tagging and GVRP
    IEEE 802.1s: Multiple Spanning Tree Protocol(MSTP)
    IEEE 802.1X: Port-based network access control
    IEEE 802.3: 10BASE-T
    IEEE 802.3ab: 1000BASE-TX
    IEEE 802.3ad: Port Trunking with Link Aggregation Control Protocol (LACP)
    IEEE 802.3u: 100BASE-TX Fast Ethernet and 100BASE-FX Fast Ethernet Fiber
    IEEE 802.3x: Flow Control and Back-Pressure
    IEEE 1588-2008: Precision Time Protocol (PTP)
  • Internet ProtocolIPv4 and IPv6

PoE Features

  • PoE Modes802.3af
    802.3at (2-event)
    802.3at (LLDP)
  • Number of PoE Plus Injector Ports8
  • PSE Type802.3at Type 2
    Alternative A
  • Maximum Power/PoE Port (Max.)15.4W (IEEE 802.3af)
    30W (IEEE 802.3at)
  • Total Power Budget (Max.)120W at 75°C
  • Standard PoE Voltage OutputYes
    IEEE 802.3af compliant - 46-57VDC/3.4A
    IEEE 802.3at compliant - 50-57VDC/3A
  • PoE ControlEnable or disable PoE, set/port PoE mode, power budget, power budget mode (auto/manual), and schedule-based PoE functions
  • Power Budget Warning LevelYes
  • PoE Powered Device CheckReal-time status monitoring of PoE PDs with an option to reset the PoE PD
  • Real-time PoE StatusYes
  • PoE Output Pin-Out (RJ45)Pins 1, 2 - V+
    Pins 3, 6 - V-
  • PoE SchedulingPoE ports are configurable as On/Off by hourly/daily/weekly basis

Management Features

  • Configuration and MonitoringOut-Band Management: Console Port with Command Line Interface (CLI) - Similar to Cisco CLI, In-Band Management: WEb Interface (HTTP/HTTPS) or a Telnet/SSH console with CLI
  • Embedded WatchdogEmbedded hardware watchdog timer automatically resets system if switch system failure occurs
  • System Upgrade/BackupProvides TFTP/Web interface for firmware upgrade and configuration backup/restore
  • SNMPV1, V2c, V3 with SNMP trap function, up to four trap stations
  • SNMP MIBMIB-II, VLAN MIB, IGMP MIB, Ethernet-like MIB, Comtrol Private MIB, and RMON
  • Email WarningAutomatic warning, up to four accounts by pre-defined events
  • System LogSupports both local mode and server mode
  • DHCPDHCP client, DHCP server with IP and MAC address binding, Port-based DHCP server configuration and DHCP relay agent (Option 82)

Network Performance

  • Back-PressureIEEE 802.3x 1000Mbps Half-Duplex only
  • Class of Service (CoS)IEEE 802.1p 4 priority queues/port
  • Flow Control Pause FrameIEEE 802.3x 10/100/1000Mbps Full-Duplex
  • GMRPGARP Multicast Registration Protocol
  • IGMP SnoopingV1/V2/V3 for multicast filtering and IGMP QUery V1/V2; Supports unknown multicasting, processes forwarding policies: drop, flooding and forward to router port
  • IP SecurityAssign authorized IP addresses to specific port, 10Max/port
  • Loop ProtectionProvides Layer 2 loop prevention through the STP, RSTP, and MSTP. Loop protection increases the efficiency of STP, RSTP, and MSTP by preventing ports from moving into a forwarding state that would result in a loop in the network
  • Packet Buffer Memory1Mbits
  • Port-Based Network Access ControlIEEE 802.1X: Supports user authentication by the RADIUS account, password and key for the RADIUS servers (Primary and Secondary), TACACS+ support
  • Port ConfigurationPort link speed, link mode, port status, enable/disable
  • Port MirroringOnline traffic monitoring on multiple selected ports
  • Port SecurityAssign authorized MAC addresses to specific port, 10 max/port
  • Port TrunkIEEE 802.3ad LACP with timer and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups including gigabit Ethernet ports
  • Private VLANDirect client ports in isolated/community VLAN to promiscuous port in primary VLAN
  • Rate ControlIngress filtering for broadcast, multicast, unknown DA or all packets. Egress filtering for all packet types
  • Switch Technology32Gbps switch fabric, store/forward switch technology, 8K MAC address
  • System Throughput8.3 Mega packets/sec
    14,880pps - 10Mbps; 148,800pps - 100Mbps; 1,488,100pps - 1000Mbps
  • Time SynchronizationSupports IEEE 1588-2008, (PTP) and NTP protocols with daylight savings and localized time sync functions
  • Prioritization (QoS)802.1p COS tag and IPv4 ToS/Diffserv information to prioritize industrial network traffic
  • VLANIEEE 802.1Q tag VLAN with 256 (max) VLAN entries and 2K GVRP entries; 3 VLAN link modes; trunk, hybrid, and link access IEEE 802.1 QinQ supports double VLAN tag function for implementing metro network topologies

Network Redundancy

  • Rapid Spanning Tree ProtocolIEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
    Compatible with legacy STP and IEEE 802.1w
  • Multiple Spanning TreeIEEE 802.1s MSTP, each MSTP instance can include one or more VLANs
  • Redundant Ring TechnologyFailure recovery within 5ms
    Rapid Dual Homing: Multiple uplink paths to upper switches
    Ring Trunking: Integrates port aggregate function in ring path to get higher throughput ring architecture
    Multiple Ring: Couple or multiples of up to 4 100M rings and up to 2 Gigabit rings in one switch
Electrical Specifications
  • Device Power Input Voltage
    (DC1/DC2 – Positive or Negative)
    • IEEE 802.3af 48VDC (46-57VDC)
    • IEEE 802.3at 53VDC (50-57VDC)
  • Device Power Consumption
    • Without PD Load (max.) 15W
    • With PD Load (max.) 140W
  • Power Connector TypeOne 4-pin terminal block for DC1/2
  • Power Input RedundancyDual Redundant Inputs
  • PSU TypePassive
  • Reverse Polarity ProtectionYes
  • Digital Output (Relay Output)1
    • DC Input Voltage24VDC
    • Current Consumption (24VDC) 0.5A maximum
  • Multi-Event Relay FeaturePower, Port Link, Ring Status Change, Ping, Ping Reset, Dry Output, and DI
Environmental Specifications
  • Air Temperature
    • System On-40° to 75°C
    • System Off-40° to 85°C
  • Operating Humidity (non-condensing)0% to 95%
  • MTBF (Mean Time Between Failures)50.9 years
Export Information
  • Packaged Shipping Weight 4.1 lbs
    1.86 kg
  • Package Dimensions11.3" x 5.5" x 9.1"
    28.7 x 13.97 x 23.11 cm
  • UPC Code 7-56727-32046-3
  • ECCN 5A992
  • Schedule B Number 8517.62.0050
Regulatory Approvals
  • Emissions European Standard EN55022
    FCC Part 15 Subpart B
    Class A limit
  • Immunity European Standard EN55024:
    IEC 1000-4-2/EN61000-4-2: ESD
    IEC 1000-4-3/EN61000-4-3: RF
    IEC 1000-4-4/EN61000-4-4: Fast Transient/ Burst
    IEC 1000-4-5/EN61000-4-5: Surge
    IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
    IEC 1000-4-8/EN61000-4-8: Magnetic Field
    IEC 1000-4-11/EN61000-4-11: DIPS and Voltage Variations
  • Safety IEC 60950/EN60950 (LISTED)
    CSA C22.2 No. 60950/UL60950
  • Vibration IEC 61373
  • Shock IEC 61373
  • OtherEuropean Standard: 2011/65/EU Directive (RoHS 2)
    NEMA TS2 Compliant

Find a Distributor

» Industrial Distributors
» North American Distributors
» International Distributors

Pre-Sales Questions

Pepperl+Fuchs Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.

Fax: +1.330.405.4710
[email protected]

Pepperl+Fuchs Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.

Fax: +1.330.405.4710
[email protected]

DocumentDescriptionDownload File
RocketLinx® ES7510-XT Quick Install GuideQuick guide to installation and configuration information.
Product Support and Service Information

Part Number: 32046-3

Sales Support

Call +1.330.486.0001, or e-mail [email protected]

Technical Support

For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.330.486.0001, or visit our forum .


Pepperl+Fuchs Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all RocketLinx products! View Warranty

Extended Warranty Available

File NameDownload
Software and Documentation