DeviceMaster ® PNIO-2101
New Model Available
View the updated product.
For new projects, we recommend our latest model.
1-Port serial device server with DB9 connectors and one Ethernet port
Part Number: 99604-0
1-Port serial device server with DB9 connectors and one Ethernet port
- Wide DC input voltage range (5-30 volts)
- DIN-rail mounting and screw terminal connections
- Wide operating temperature range (-40º C to 75º C)
- Surge protection for the serial port
- Variable power input
- Support for PROFINET IO
- PROFINET Certification
- One serial ports with secure screw terminal connectors
- SSL & SSH management, SSL serial data stream encryption
- Software Controllable integrated 120Ω Termination Resistor for both the Transmit and Receive side in RS-422/485 Mode
- NEMA TS2 Certified
- UL Safety Certified
Only the DeviceMaster PNIO Industrial Ethernet gateway offers a solution that configures in minutes via the web, allowing you to support PROFINET IO. The DeviceMaster PNIO-2101 provides an RS-232, RS-422 or RS-485 software-selectable serial connection to a PROFINET IO network.
The PNIO-2102 supports Siemens PLCs with extended PROFINET diagnostics, such as the SIMATIC S7-300, S7-400, S7-1200, S7-1500, and ET 200 CPUs.
- DeviceMaster ® PNIO-2101
- Interface Specification 10/100 BASE-T Ethernet
-
Memory
- SDRAM 32 MB
- Flash 8 MB
- Enclosure UL94-V0 Plastic
- Installation MethodDIN Rail (35mm)
- LED Indicators Status, Ethernet Port Link and Activity
- Dimensions4.52” x 3.9” x 0.9”
114.81 x 99.1 x 22.86mm - Product Weight 0.25lbs
113.4g
- Input Voltage Requirements5-30VDC
- Power Consumption (maximum)1.5 W
- Power Input RedundancyDual Redundant Power Input
- ESD Surge ProtectionProvides minimum of 25KV protection on all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
-
Air temperature
- System On -40 to 75° C
- System Off -40 to 85° C
- Operating Humidity (non-condensing)0% to 95%
- Altitude0 to 10,000 Feet
3,048 m - MTBF (Mean Time Between Failures)61.4 Years
Serial Communications
- Connector Type DB9M
- Number of Ports1
- Serial Interfaces RS-232
RS-422
RS-485
RS-485 2-Wire
RS485 4-Wire Master
RS-485 4-Wire Slave - Termination Resistor for RS422/485Software controllable 120Ω termination resistors available for each transmit and receive differential pair on every port. The 120Ω termination resistors can be enabled between TX+ and TX- OR RX+ and RX- or both on every port
-
Baud Rate 300 to 230Kbps
- Receive Buffer4.5 KB
- Transmit Buffer4.5 KB
-
Serial Data Control
- Data Bits5, 6, 7 or 8
- Parityodd, even, or none
- Stop Bits 1, 1.5 (with 5 data bits), or 2
- Flow Control None, RTS/CTS, XON/XOFF, or Half-duplex
- *Stop bit 1.5: Supported only when used with 5 data bits
- Number of Ports 1
- Speed 10/100Mbps
- Connector Type RJ45F Auto MDI/MDI-X
- LEDEthernet Link (Green)
Ethernet Activity (Amber) - Ethernet specific featuresEthernet packet switching, Auto Negotiation, Link/Activity Status LED
- Network Protocols ARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, SNMP (MIB-II), Telnet, and TFTP, and supports IP multicast data transmission
PROFINET IO Features
- Supported PLCs Including but not limited to:
Siemens SIMATIC S7-300, S7-400, S7-1200, S7-1500, and ET 200 CPUs that support the extended PROFINET diagnostics (listed here) - Key Features• Connectivity – connect serial and Ethernet TCP/IP devices to PROFINET IO controllers and TCP/IP applications
• 8ms to 512ms IO cycle update time – supports high-speed devices and also ensures PLC can process each received data packet
• Intelligent packet identification – start and end of transmission character detection/removing/appending
• Received packet size control – truncate, drop, or save oversized packets as record data
• Large received packet support – up to 1518 bytes serial and 2048 bytes Ethernet TCP/IP
• Shared Device function – different ports can be shared between two PLCs - DiagnosticsYes
- GSDML fileYes
Features
- SNMP Support MONITORING ONLY.
- Other Software FeaturesPortVision DX remote management
- Manufacturer's Warranty 5 Years
- Packaged Shipping Weight0.55lbs
249g - Package Dimensions5-11/16” x 5-11/16” x 3-3/8”
144.46 x 144.46 x 85.73mm - UPC Code7-56727-99604-0
- Country of Origin USA
- ECCN5A992
- Schedule B Number8471.80.1000
-
Emissions
Canadian EMC requirements
ICES-003: 1997
CISPR-22: 1997
European Standard EN55022: Amendment A1
IEC1000-3-2/EN61000-3-2 Harmonic
IEC1000-3-3/EN61000-3-3 Flicker
FCC Part 15 Subpart B: Class A limit
AS/NZS-3548
-
Immunity
EN55024: 1998
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
IEC 1000-4-8/EN61000-4-8: Magnetic Field
IEC 1000-4-11/EN61000-4-11: Dips and Voltage Variations
-
Safety
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL60950
-
Other Regulatory Approvals
European Standard: RoHS 2 Compliant under CE
- Ground must be tied to signal ground.
» Industrial Distributors
» North American Distributors
» International Distributors
Pepperl+Fuchs Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.
+1.330.486.0001
Fax: +1.330.405.4710
[email protected]
Pepperl+Fuchs Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.
+1.330.486.0001
Fax: +1.330.405.4710
[email protected]
Part Number: 99604-0
Call +1.330.486.0001, or e-mail [email protected]
For technical assistance, our U.S.-based technical support team is only a phone call away.
Call +1.330.486.0001, or visit our forum .
Pepperl+Fuchs Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all DeviceMaster products!
File Name | Download |
---|---|
Firmware, Device Drivers, Supporting Documents, and Utilities | ![]() |