Your automation, our passion.

+1.763.957.6000  |  HPD Support Login  |  Newsletter Signup

DeviceMaster EIP-2304

4-port DIN rail serial device server (RS-232/422/485) with four DB9 connectors and dual Ethernet ports to support your industrial EtherNet/IP gateway

Part Number: 99611-8

PortVision DXweb

 
  • DIN rail mountable
  • Four DB9 male serial ports (RS-232/422/485) with a minimum of 25KV of surge protection
  • Variable power input – 5-30VDC with a screw terminal connector
  • Dual RJ45 Ethernet ports to daisy-chain another network device
  • Provide PLC connectivity – to standard EtherNet/IP™ serial devices
  • Wide industrial operating temperature range (-40° to 75°C)
  • Software Controllable integrated 120Ω Termination Resistor for both the Transmit and Receive side in RS-422/485 Mode
  • PortVision DX – configure network settings for the DeviceMaster and monitor status, update firmware and if necessary, resolve issues remotely
  • Security features – SSL & SSH management, SSL serial data stream encryption
 

The DeviceMaster EIP-2304 provides connectivity from a wide variety of EtherNet/IP controllers and applications to a vast array of serial and Ethernet TCP/IP raw/ASCII devices. With this gateway, you can connect virtually any EtherNet/IP based PLC, SCADA, HMI, OPC Server or other controller to ASCII interface barcode scanners, RFID readers, printers, encoders, weigh scales, vision systems and many others.

DeviceMaster EIP-2304 embedded web pages provide many capabilities not found in standard gateways. It can be configured to most any environment in just minutes. Diagnostics pages greatly simplify maintenance and trouble shooting. System web pages provide the tools to update firmware, backup and restore configurations, and selectively restore defaults. Download PortVision DX, a remote management and network configuration application that makes it a simple task to detect and manage every DeviceMaster on the network. It can also be used to facilitate firmware updates, troubleshooting, and remote administration.


Includes:
  • DeviceMaster EIP-2304
  • DB9 Loopback plug
  • Installation Quick Start
 
Hardware
  • Interface Specification 10/100 BASE-T Ethernet
  • Memory
    • SDRAM 32 MB
    • Flash 8 MB
  • Enclosure UL94-V0 PLASTIC
  • Installation Method DIN Rail (35mm)
  • Network Protocols AvailableEtherNet/IP™
  • LED IndicatorsStatus, Ethernet Port Link and Activity
  • Dimensions 4.6" x 3.9" x 1.8"
    116.8 x 99.1 x 45.7 mm
  • Product Weight 0.45lbs
    204.12g
Electrical Specifications
  • Input Voltage Requirements 5-30VDC
  • Power Consumption (Maximum)3.0 Watts
  • Power Input Redundancy Dual Redundant Power Input
  • ESD Surge ProtectionProvides minimum of 25KV protection on all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.
Environmental Specifications
  • Air temperature
    • System On -40 to 75° C
    • System Off -40 to 85° C
  • Operating Humidity (non-condensing) 0% to 95%
  • Altitude 0 to 10,000 Feet
    3,048 m
  • MTBF (Mean Time Between Failures)42.3 Years

Serial Communications

  • Connector Type DB9 Male
  • Number of Ports 4
  • Serial Interfaces RS-232
    RS-422
    RS-485 2-Wire
    RS-485 4-Wire (Master/Slave)
  • Termination Resistor for RS422/485Software controllable 120Ω termination resistors available for each transmit and receive differential pair on every port. The 120Ω termination resistors can be enabled between TX+ and TX- OR RX+ and RX- or both on every port
  • Baud Rate 300 to 230Kbps
    • Receive Buffer 4.5KB
    • Transmit Buffer 4.5KB
  • Serial Data Control
    • Data Bits5, 6, 7 or 8
    • Parityodd, even, or none
    • Stop Bits 1, 1.5, or 2
    • Flow Control None, RTS/CTS, XON/XOFF, or Half-duplex
  • *Stop bit 1.5: Supported only when used with 5 data bits
Ethernet Specifications
  • Number of Ports2
  • Speed10/100Mbps
  • Connector TypeRJ45F Auto MDI/MDI-X
  • LEDEthernet Link (Green)
    Ethernet Activity (Amber)
  • Ethernet Specific FeaturesEthernet packet switching, Auto Negotiation, Link/Activity Status LED
  • Network ProtocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, SNMP (MIB-II), Telnet, and TFTP, and supports IP multicast data transmission
EtherNet/IP Features
  • Supported PLCsIncluding but not limited to:
    Allen Bradley: ControlLogix, CompactLogix, FlexLogix, SoftLogix, SLC 5/05, PLC-5, and MicroLogix Models
  • Web Page Configuration• Three methods of receive communication to the PLC – Write-to-Tag/File, Write-to-Tag/File-Synced, and Polling
    • Connectivity – Ethernet/IP to serial and Ethernet TCP/IP raw/ASCII devices
    • Connectivity to high-speed devices. Supports message rates as high as 50 updates per second when receive mode is configured to Write-to-Tag/File.
    • Vendor Specific CIP objects – configuration, data transfer, and statistics
    • Large received packet support – up to 1518 bytes serial and 2048 bytes Ethernet TCP/IP
    • Received packet size control – truncate or drop oversized packets
    • Message Throttling – ensures PLC can process each received data packet
    • Intelligent packet identification – start and end of transmission character detection/appending
  • DiagnosticsYes
  • Electronic Data SheetsYes
  • Sample PLC ProgramsYes

Features

  • SNMP Support MONITORING ONLY
  • Other Software FeaturesPortVision DX remote management
    Save/Load configuration files
  • Manufacturer's Warranty 5 Years
Export Information
  • Packaged Shipping Weight 0.85lbs
    386g
  • Package Dimensions 5-11/16" x 5-11/16" x 3 3/8"
    144.46 x 144.46 x 85.73 mm
  • UPC Code 7-56727-99611-8
  • Country of Origin USA
  • ECCN 5A992
  • Schedule B Number 8471.80.1000
Regulatory Approvals
  • Emissions FCC Part 15 Subpart B: Class A limit
    Canadian EMC Requirements: ICES-003
    European Standard EN61000-6-4
    European Standard EN55022
    AS/NZS CISPR 22
  • Immunity European Standard EN61000-6-2
    European Standard EN55024
    IEC 1000-4-2/EN61000-4-2: ESD
    IEC 1000-4-3/EN61000-4-3: RF
    IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
    IEC 1000-4-5/EN61000-4-5: Surge
    IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
    IEC 1000-4-8/EN61000-4-8: Magnetic Field
    IEC 1000-4-11/EN61000-4-11: Dips and Voltage Variations
  • Safety UL 61010-1, UL 61010-2-201
    CSA C22.2 No. 61010-1-12
    CSA C22.2 No. 61010-2-201:14
  • Other Regulatory Approvals European Standard: RoHS 2 Compliant under CE
    NEMA TS2 COMPLIANT
    ODVA Certification

Pinout Diagram
  • Ground must be tied to signal ground.Pinout Diagrams
 
Find a Distributor

» Industrial Distributors
» North American Distributors
» International Distributors

Pre-Sales Questions

Pepperl+Fuchs Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]

Pepperl+Fuchs Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]


 
Product Support and Service Information

Part Number: 99611-8

Sales Support

Call +1.763.957.6000, or e-mail [email protected]

Technical Support

For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.763.957.6000, or visit our forum .

Warranty

Pepperl+Fuchs Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all DeviceMaster family products!

View Warranty

Extended Warranty Available