Your automation, our passion.

+1.763.957.6000  |  HPD Support Login  |  Newsletter Signup

DeviceMaster ® UP 1-Port 5-30VDC

1-port panel mount serial device server (RS-232/422/485) with a DB9 connector and a single Ethernet port to support your industrial EtherNet/IP gateway

Part Number: 99441-1

PortVision DXweb

 
  • Panel mountable
  • One DB9 male serial port (RS-232/422/485) with a minimum of 15KV of surge protection
  • Variable power input – 5-30VDC
  • One RJ45 Ethernet port
  • Provide PLC connectivity – to standard EtherNet/IP™ serial devices
  • Wide industrial operating temperature range (-37° to 74°C)
  • PortVision DX – configure network settings for the DeviceMaster and monitor status, update firmware and if necessary, resolve issues remotely
  • Security features – SSL & SSH management, SSL serial data stream encryption
 

The DeviceMaster UP provides connectivity from a wide variety of EtherNet/IP controllers and applications to a vast array of serial and Ethernet TCP/IP raw/ASCII devices. With this gateway, you can connect virtually any EtherNet/IP based PLC, SCADA, HMI, OPC Server or other controller to ASCII interface barcode scanners, RFID readers, printers, encoders, weigh scales, vision systems and many others.

DeviceMaster UP embedded web pages provide many capabilities not found in standard gateways. It can be configured to most any environment in just minutes. Diagnostics pages greatly simplify maintenance and trouble shooting. System web pages provide the tools to update firmware, backup and restore configurations, and selectively restore defaults. Download PortVision DX, a remote management and network configuration application that makes it a simple task to detect and manage every DeviceMaster on the network. It can also be used to facilitate firmware updates, troubleshooting, and remote administration.


Includes:
  • DeviceMaster UP 1 Port DB9M 5-30VDC Device
  • Power Supply
  • DB9F to DB25M Adapter
  • Loopback Plug
  • Quick Installation card
  • Power Connector
 
Hardware
  • Bus Interface Specification 10/100 BASE-T
  • Memory
    • SDRAM16 MB
    • Flash8 MB
  • Enclosure STAINLESS STEEL
  • Installation Method Panel Mountable or DIN Rail
  • LED Indicators 100MB Ethernet, Duplex, Ethernet Link/Activity, and Status
  • Dimensions 3.6" x 0.8" x 2.8"
    91.4 x 20.3 x 71.1 mm
  • Product Weight7.8 oz
    0.22 Kg
Electrical Specifications
  • Device Requirements200mA @ 5VDC
    90mA @ 24VDC
  • Device Consumption2.1 Watts
  • Comtrol External Power Supply
    • Input90-264VAC, 50-60Hz
    • Output24VDC @ 1A
  • ESD Surge ProtectionProvides minimum of 15KV for a duration of 1ns @ 200A. All Ethernet components are rated to 1.5KV magnetic surge protection in addition tothe surge protection levels specified.
Environmental Specifications
  • Air temperature
    • System On-40 to 75° C
    • System Off-40 to 85° C
  • Operating Humidity (non-condensing) 5% to 95%
  • Altitude 0 to 10,000 Feet
    3,048 m
  • Heat Output7.2 BTU/Hr
  • MTBF (Mean Time Between Failures)48.4 Years

Serial Communications

  • Connector TypeDB9M
  • Number of Ports1
  • Software Selectable InterfacesRS-232
    RS-422
    RS-485, 4-wire, Master
    RS-485, 4-wire, Slave
    RS-485, 2-wire
  • Baud Rate 300 to 230.4Kbps
    • Receive Buffer4.5 KB
    • Transmit Buffer4.5 KB
  • Serial Data Control
    • Data Bits5, 6, 7 or 8
    • Parityodd, even, or none
    • Stop Bits 1, 1.5 (with 5 data bits), or 2
    • Flow Control None, RTS/CTS, XON/XOFF, or Half-duplex
  • *Stop bit 1.5: Supported only when used with 5 data bits

Ethernet Specifications

  • Connector Type RJ45F Auto MDI/MDI-X
  • Number of Ports 1
  • Network ProtocolsARP, BOOTP, DHCP/RARP, HTTP, HTTPS, SSH, SSL/TLS, ICMP, RFC 1006 (ISO over TCP), SNMP (MIB-II), TCP/IP & UDP socket services, Telnet, and TFTP, and supports IP multicast data transmission
  • Industrial ProtocolsEtherNet/IP, PROFINET, MODBUS
  • Software Certification PROFINET Certification (PI)
    EtherNet/IP Certification (ODVA)

EtherNet/IP Features (Downloadable)

  • Supported PLCsIncluding but not limited to:
    Allen Bradley: ControlLogix, CompactLogix, FlexLogix, SoftLogix, SLC 5/05, PLC-5, and MicroLogix Models
  • Web Page Configuration• Three methods of receive communication to the PLC – Write-to-Tag/File, Write-to-Tag/File-Synced, and Polling
    • Connectivity – Ethernet/IP to serial and Ethernet TCP/IP raw/ASCII devices
    • Connectivity to high-speed devices. Supports message rates as high as 50 updates per second when receive mode is configured to Write-to-Tag/File.
    • Vendor Specific CIP objects – configuration, data transfer, and statistics
    • Large received packet support – up to 1518 bytes serial and 2048 bytes Ethernet TCP/IP
    • Received packet size control – truncate or drop oversized packets
    • Message Throttling – ensures PLC can process each received data packet
    • Intelligent packet identification – start and end of transmission character detection/appending
  • DiagnosticsYes
  • Electronic Data Sheets (EDS)Yes
  • Sample PLC ProgramsYes

Features

  • SNMP SupportMonitoring Only.
  • Supported PLCsIncluding but not limited to:
    Allen Bradley: ControlLogix, CompactLogix, FlexLogix, SoftLogix, SLC 5/05. PLC-5, and MicroLogix Models
  • Other Software FeaturesPortVisionDX remote management
    Save/Load configuration files
  • Manufacturer's Warranty5 Years
  • IncludesPower Supply
    US Power Cord
    Euro Power Cord
    DB9F to DB25M Adapter
    Loopback Plug
    35mm Din Rail clips & screws
    Power Connector
Export Information
  • Packaged Shipping Weight1.4lbs
    0.63 kg
  • Package Dimensions10.25" x 2.75" x 7.50"
    260.35 x 69.85 x 190.5 mm
  • UPC Code7-56727-99441-1
  • Country of OriginUSA
  • ECCN5A992
  • Schedule B Number8471.80.1000
Regulatory Approvals
  • Emissions FCC Part 15 Subpart B: Class A limit
    Canadian EMC requirements ICES-003
    European Standard EN55022
    AS/NZS CISPR-22
  • Immunity European Standard EN55024
  • Safety IEC 60950/EN60950
    CSA C22.2 No. 60950/UL60950
  • Other European Standard: 2015/863/EU (RoHS 3) Directive
  • Regulatory Approvals
  • CE Check MarkCUL1
Pinout Diagram
  • Ground must be tied to signal ground.Pinout Diagrams
 
Find a Distributor

» Industrial Distributors
» North American Distributors
» International Distributors

Pre-Sales Questions

Pepperl+Fuchs Comtrol's Pre-sales Team
For sales questions or to locate a reseller near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]

Pepperl+Fuchs Comtrol's Industrial Automation Sales
For sales questions or to locate an industrial distributor near you.

+1-800-926-6876 (1-800-Go Rocket)
+1-763-957-6000
Fax: +1-763-957-6001
[email protected]


 
Product Support and Service Information

Part Number: 99441-1

Sales Support

Call +1.763.957.6000, or e-mail [email protected]

Technical Support

For technical assistance, our U.S.-based technical support team is only a phone call away.

Call +1.763.957.6000, or visit our forum .

Warranty

Pepperl+Fuchs Comtrol offers a 30-Day satisfaction guarantee and a 5-year limited warranty on all DeviceMaster family products! View Warranty

Extended Warranty Available

Software & Drivers
» Comtrol FTP Site